[Tonyride]

I think it is more than just caps, you would probably have to remove the door panel and install them that is why Mercedes would charge so much for the installation. I am guessing these would fit all Mercedes.

Don't you just unscrew the orignal and then screw the new one back on?

 

[Tonyride]

They could be aluminum. If it's steel I hope it's stainless.

 

[Tonyride]

Is it this easy? Anyone?

I just got them yesterday and I didn't put them on yet. The plastic pins don't uncrew as easily as you would think. I'll have to use a pair of pliars and a piece of rubber to wrap around the plastic pins to help unscrew them off. BTW, when you buy the AMG pin, you only get 1, not a pair. So I had to order 2 of them. They only fit in the front doors from what I understand. Won't fit the rear doors.

 

[Tonyride]

Thanks, Tony!

Let us know how they feel as well...i.e., can you rest your left arm on the sill? the current ones jut out too much.

I have no problems with the current ones obstructing. I just don't like the cheap plastic look. The AMG pins appear to be made of stainless steel. The tip with the AMG inprint is polished. The sides are brushed.

 

[Tonyride]

So how do you install the front pins

You just unscrew them. They're very tight so you may need to use pliers. I wrap the plastic lock pins with a piece of thin rubber to protect it while using the pliers to help twist the pins off so I won't damage them in case I need it for some reason.

 

[Tonyride]

how about sport pedals has any body installed them yet

Yup, I have them, too. You just grab a corner of a pad and peel it off. Putting them on is a bit of a challenge but pretty much goes on the same way.